Pengaruh Variasi Media Pendingin Terhadap Kekerasan dan Mikrostruktur Pada Pengecoran Aluminium 6061

Sigit Kristiadi; Unung Lesmanah; Artono Raharjo

doi:10.33474/rm.v2i2.19906

Authors

Sigit Kristiadi Universitas Islam Malang
Unung Lesmanah Universitas Islam Malang
Artono Raharjo Universitas Islam Malang

DOI:

https://doi.org/10.33474/rm.v2i2.19906

Keywords:

Metal Casting, Quenching, Aluminium 6061, Hardness, Microstructure

Abstract

The casting and the cooling process on the metal can affect the mechanical properties and physical properties that are formed. Changes in metal properties are influenced by the type and cooling medium in the metal cooling process. This study aims to determine the effect of different cooling media (Water, Dromus, and Coolant radiator) in the Quenching process on the hardness and microstructure of Aluminum 6061 which has passed the casting stage. It can be concluded that the variations in the cooling media used affect the different levels of hardness and microstructure of the test specimens. From the test results, it was found that the Water cooling media specimen had the highest level of hardness, the smallest grain size, and the amount of α-Al matrix formed was lower than the Dromus cooling media specimen. The test object with Dromus cooling medium has a higher hardness level, smaller grain size, and the amount of α-Al matrix formed is lower than the Coolant radiator coolant media test object which has the lowest hardness level, the largest grain size, and the amount of α-Al matrix the most

References

H. Sudjana, Teknik Pengecoran. 2008.

S. Khoiruddin, P. Hartono, and U. Lesmanah, “Silika Pada Pembuatan Inti Terhadap Kekasaran Produk Hasil Cor,” J. Tek. Mesin, pp. 1–6, 2019.

Kokok Cong Jiwo Rogo. Geger, “Pengaruh Variasi Suhu Tuang Terhadap Kekerasan Dan Struktur Mikro Pada Hasil Remelting Aluminium Tromol Supra X Dengan Cetakan Logam,” J. Ilm. Pendidik. Tek. Mesin, 2013.

M. Nafi, “Analisis Kekerasan AL-6061 Hasil Cor Dengan Perlakuan Panas Double Quenching,” no. June, 2016.

T. V. Christy, N. Murugan, and S. Kumar, “A Comparative Study on the Microstructures and Mechanical Properties of Al 6061 Alloy and the MMC Al 6061/TiB2/12P,” J. Miner. Mater. Charact. Eng., vol. 09, no. 01, pp. 57–65, 2010, doi: 10.4236/jmmce.2010.91005.

M. Masyrukan, “Pengaruh Variasi Temperatur Air Sebagai Pendinginan Terhadap Karakteristik Coran Aluminium Dengan Media Cetakan Pasir Co2,” Media Mesin Maj. Tek. Mesin, vol. 20, no. 2, pp. 25–31, 2019, doi: 10.23917/mesin.v20i2.8532.

T. V. Rajan, C. P. Sharma, and A. Sharma, Heat Treatment: Principles and Techniques, Second Edition, 2nd ed. New Delhi: Asoke K. Ghosh, PHI Learning Private Limited, M-97, Connaught Circus, New Delhi-110001, 2011.

Y. C. Pamungkas, Wahono, and P. Trihutomo, “Identifikasi tingkat kekerasan paduan Al-Si yang di-quenching dengan variasi media pendingin dan waktu pencelupan,” no. 2, pp. 1–6, 2016.

N. Pradita, B. Suroso, and M. M, “Pengaruh Cairan Pendingin Minyak Dromus Pada Material Kuningan Terhadap Kekasaran Permukaan Dengan Menggunakan Mesin Bubut Bergerinda,” J. Ekon. Vol. 18, Nomor 1 Maret201, vol. 2, no. 1, pp. 41–49, 2020.

ASTM International, “Standard Test Methods for Rockwell Hardness of Metallic Materials,” ASTM E18-15, p. 38, 2015, doi: 10.1520/E0018-15.2.

L. Korson, W. Drost-Hansen, and F. J. Millero, “Viscosity of Water at Various Temperatures,” J. Phys. Chem., vol. 73, pp. 34–39, 1968.

Y. L. Liu, S. B. Kang, and H. W. Kim, “Complex microstructures in an as-cast Al-Mg-Si alloy,” Mater. Lett., vol. 41, no. 6, pp. 267–272, 1999, doi: 10.1016/S0167-577X(99)00141-X.

T. Surdia and K. Chijiiwa, Teknik Pengecoran Logam, 9th ed. Jakarta: Pradnya Paramita, 2006.

R. toat Wicaksono, Suharno, and B. Harjanto, “Pengaruh Kuat Arus Pada Pengelasan Paduan Aluminium 6061 Dengan Menggunakan Metode Las TIG Terhadap Kekerasan dan Struktur Mikro,” J. Pendidik. Tek. Mesin Undiksha, vol. 10, pp. 37–44, 2019, [Online]. Available: http://10.0.93.79/jptm.v10i2.51606.

S. Seifeddine, G. Timelli, and I. L. Svensson, “Influence of Quench Rate on The Microstructure and Mechanical Properties of Aluminium Alloys A356 and A354,” Int. Foundry Res., vol. 59, no. 1, pp. 2–10, 2007.

S. dan R. F. Susri Mizhar, “Pengaruh Penambahan Magnesium Terhadap Kekerasan, Kekuatan Impak Dan Struktur Mikro Pada Aluminium Paduan (Al-Si) Dengan Metode Lost Foam Casting,” vol. 2, no. 2, pp. 77–84, 2016.

S. Suhardan and R. Kohar, “Pengaruh Variasi Temperatur Normalizing Terhadap Besar Butir Dan Kekerasan Material Baja Karbon Aisi 1035,” Turbul. J. Tek. Mesin, vol. 2, no. 2, p. 62, 2020, doi: 10.36767/turbulen.v2i2.550.