ANALISIS NILAI OVERALL EQUIPMENT EFFECTIVENESS PADA MESIN PACKER FOCKE FX 2 DI PT ABC

Reditya Chiesa Ramadhan; Unung Lesmanah; Mochammad Basjir; Nur Robbi; Rangga Ega Santoso

doi:10.33474/rme.v5i1.23696

Authors

Reditya Chiesa Ramadhan Universitas Islam Malang
Unung Lesmanah Universitas Islam Malang
Mochammad Basjir Universitas Islam Malang
Nur Robbi Universitas Islam Malang
Rangga Ega Santoso University of Stuttgart

DOI:

https://doi.org/10.33474/rme.v5i1.23696

Keywords:

Packer Focke FX2, Overall Equipment Effectiveness, Six Big Losses, FMEA

Abstract

This study carried out to overcome the performance and efficiency problems of the Packer Focke FX 2 machine at PT. ABC. The study uses descriptive quantitatie approach to analyze Overall Equipment Efetiveness (OEE) value. The resultof OEE value is analyzed by Six Big Losses method to find the losses factors and used the failure mode Effect Analysis (FMEA) method with fishbone diagram to find its root causes and provide suggestion for improvement. The result of the study is OEE value from the period of June 2024 to Ugust 2024, which was 43,4 %. This result is lower than the world standart OEE of 85 %. These result are caused by high value of idling and minor stoppage losses at 15,84% and breakdown losses at 13,46%. The root of problems was found using FMEA method with RPN value of 288, which is failure in blank feeding process with type of failure mode is blank material jamming in blank track area because of spray glue jet was not function optimally. So that, the recommendation of improvements that are given are related to preventive method, spare part management, and employee competency

References

Oktasari, Eta. 2019. TESIS BM185407.

Ridwansyah, M., Dewi Nusraningrum, dan Ahmad H. Sutawijaya. 2019. Analisis Overall Equipment Effectiveness Untuk Mengendalikan Six Big Losses Pada Mesin Pembuatan Nugget.

Rahmadhani Delia, F., H. Taroepratjeka, dan L. Fitria. 2014. “Usulan Peningkatan Efektivitas Mesin Cetak Manual Menggunakan Metode Overall Equipment Effectiveness (OEE) (Studi Kasus Di Perusahaan Kerupuk TTN).”

Ulya Mukasafah, Muhimatul, dan Budihardjo Achmadi Hasyim. 2018. Analisis Efektivitas Mesin Produksi Filter Rokok Ks02 Menggunakan Metode Overall Equipment Effectiveness (OEE) Di PT. Essentra Indonesia. Vol. 07.

Latif, Abdul, dan Ratno Purnomo. 2019. Analisis Total Productive Maintenance (Tpm) Menggunakan Overall Equipment Effectiveness Di PT. Perkebunan Nusantara Vi Ophir. Vol. 19.

Rifaldi, Muhammad Rizki, Gedong Kec, Pasar Rebo, dan Jakarta Timur. 2020a. “Overall Equipment Effectiveness (OEE) Pada Mesin Tandem 03 Di PT. Supernova Flexible Packaging.” Jurnal Rekayasa Industri (JRI) 2(2).

Hisprastin, Yasarah, dan Ida Musfiroh. 2020. “Ishikawa Diagram dan Failure Mode Effect Analysis (FMEA) sebagai Metode yang Sering Digunakan dalam Manajemen Risiko Mutu di Industri.” Majalah Farmasetika 6(1):1. doi: 10.24198/mfarmasetikav6i1.27106.

Widya Wardana, Marcelly, dan Siti Hasanah. 2019. Penerapan Metode Failure Mode and Effect Analysis (Fmea) Dalam Mengidentifikasi Masalah Kerusakan Produk Pakan Ayam Pada PT. Japfa Comfeed Indonesia, Tbk Unit Lampung.

Vidian Paquita, Elfira, Dan Pringgo, dan Widyo Laksono. 2022. “Upaya Pengendalian Kualitas Produk Menggunakan Metode Fmea Serta Pendekatan Kaizen di PT Dan Liris.” Seminar dan Konferensi Nasional IDEC.

Febri Prabowo, R., Hendrik Hariyono, dan Erry Rimawan. 2020. Total Productive Maintenance (TPM) pada Perawatan Mesin Grinding Menggunakan Metode Overall Equipment Effectiveness (OEE).