Accuracy of DHT11 Temperature and Humidity Sensor In Egg Incubator

Authors

  • Aris Sudaryanto Politeknik Elektronika Negeri Surabaya http://orcid.org/0000-0001-8088-6355
  • Yohanes Aditya Wisnu W Universitas 17 Agustus 1945 Surabaya
  • Agung Kridoyono Universitas 17 Agustus 1945 Surabaya

DOI:

https://doi.org/10.33474/infotron.v4i1.20846

Keywords:

Temperature, Humidity, DHT11, Accuracy, Sensor

Abstract

Temperature and humidity are two parameters that need to be considered in hatching eggs. The research results showed that the difference in egg temperature in the incubator gave a significant difference in fertility, mortality, and hatchability. One of the most widely used temperature and humidity sensors is the DHT11 sensor. The objective of this research is to determine the accuracy of the DHT11 sensor in measuring temperature and humidity. This study uses the UT333 sensor as a reference for measuring temperature and humidity. The temperature measurement test is done with the DHT11 and UT333 sensors measuring the temperature at the same place and time, and then the difference is calculated as an error value. Humidity testing is done by the DHT11 and UT333 sensors measuring humidity at the same time and place and using a humidifier to provide variations in humidity levels. The difference in humidity between DHT11 and UT333 was then calculated as an error. Each temperature and humidity test was repeated 25 times. Based on all the tests, it was found that the DHT11 sensor has an average error value of 3.16% or an accuracy of 96.84% for temperature measurements and an average error of 7.07% or an accuracy of 92.93% for humidity measurements. The average success value for temperature and humidity testing is 94.89%.

Author Biographies

Aris Sudaryanto, Politeknik Elektronika Negeri Surabaya

Teknologi Game

Yohanes Aditya Wisnu W, Universitas 17 Agustus 1945 Surabaya

Alumni Teknik Informatika

Agung Kridoyono, Universitas 17 Agustus 1945 Surabaya

Teknik Informatika

References

A. A. D. Haris, A. Sudaryanto, and D. H. Sulistyawati, “Uji Fungsional Sistem Pengukur Suhu Tubuh Berbasis Arduino Dengan Metode Blackbox Testing,” Infotron, vol. 1, no. 1, pp. 31–35, 2021.

M. Soimah, Menetaskan Telur Unggas. Gorontalo: BALAI PENGKAJIAN TEKNOLOGI PERTANIAN GORONTALO BADAN PENELITIAN DAN PENGEMBANGAN PERTANIAN KEMENTERIAN PERTANIAN, 2010.

Y. Mariani and M. A. Hamzani, “PENGARUH SUHU PENETASAN TERHADAP FERTILITAS, MORTALITAS DAN DAYA TETAS TELUR AYAM KAMPUNG (Gallus domesticus) PADA INKUBATOR,” AGRIPTEK (Jurnal Agribisnis dan Peternakan), vol. 1, no. 1, pp. 23–28, 2021, doi: 10.51673/agriptek.v1i1.611.

S. Siswanto, M. Anif, D. N. Hayati, and Y. Yuhefizar, “Pengamanan Pintu Ruangan Menggunakan Arduino Mega 2560, MQ-2, DHT-11 Berbasis Android,” Jurnal RESTI (Rekayasa Sistem dan Teknologi Informasi), vol. 3, no. 1, pp. 66–72, 2019, doi: 10.29207/resti.v3i1.797.

M. I. Hakiki, U. Darusalam, and N. D. Nathasia, “Konfigurasi Arduino IDE Untuk Monitoring Pendeteksi Suhu dan Kelembapan Pada Ruang Data Center Menggunakan Sensor DHT11,” Jurnal Media Informatika Budidarma, vol. 4, no. 1, p. 150, 2020, doi: 10.30865/mib.v4i1.1876.

A. R. Putri, S. Suroso, and N. Nasron, “Perancangan Alat Penyiram Tanaman Otomatis pada Miniatur Greenhouse Berbasis IOT,” Seminar Nasional Inovasi dan Aplikasi Teknologi di Industri 2019, vol. Volume 5 n, pp. 155–159, 2019, [Online]. Available: https://ejournal.itn.ac.id/index.php/seniati/article/view/768

R. D. Irsansyah, “Pengujian Logika Fuzzy Pada Sistem Monitoring Tanaman Cabai,” no. 45, pp. 1–4, 2020, [Online]. Available: http://repository.untag-sby.ac.id/5928/9/JURNAL.pdf

R. R. P. Rhamadhan, “Penyiraman Tanaman Tomat Berdasarkan Kelembaban Tanah, Kelembaban Udara dan Suhu Lingkungan Menggunakan Fuzzy Logic Berbasis IOT,” in Repository.Untag-Sby.Ac.Id, Surabaya, 2019. [Online]. Available: https://academic.microsoft.com/paper/3083246305/related

M. Iqbal Kurniawan, “Alat Perawatan Tanaman Tomat Otomatis Berbasis Arduino Nano Dan Nodemcu,” Universitas 17 Agustus 1945 Surabaya, 2019.

F. Rahman, S. Sriwati, N. Nurhayati, and L. Suryani, “Rancang Bangun Sistem Monitoring Dan Kontrol Suhu Pada Mesin Penetas Telur Otomatis Berbasis Mikrokontroler Esp8266,” ILTEK : Jurnal Teknologi, vol. 15, no. 01, pp. 5–8, 2020, doi: 10.47398/iltek.v15i01.499.

D. Arya Dian, N. Festy Lalita, and M. Zaenudin, “Perancangan Dan Pembuatan Alat Inkubator Berbasis Mikrokontroler,” Jurnal Industri Elektro dan …, vol. 9, no. 1, pp. 52–62, 2020, [Online]. Available: http://jurnal.unnur.ac.id/index.php/indept/article/view/374

M. R. Wirajaya, S. Abdussamad, and I. Z. Nasibu, “Rancang Bangun Mesin Penetas Telur Otomatis Menggunakan Mikrokontroler Arduino Uno,” Jambura Journal of Electrical and Electronics Engineering, vol. 2, no. 1, pp. 24–29, 2020, doi: 10.37905/jjeee.v2i1.4579.

A. Sihasani, D. Hartama, and I. Parlina, “Implementasi ARDUINO UNO R3 dan SENSOR DHT 11 Pada Perancangan Inkubator Penetas Telur Ayam Berbasis Mikrokontroler,” BEES : Bulletin of Electrical and Electronics Engineering, vol. 1, no. 3, pp. 101–107, 2021.

F. Ariani, R. Y. Endra, E. Erlangga, Y. Aprilinda, and A. R. Bahan, “Sistem Monitoring Suhu dan Pencahayaan Berbasis Internet of Thing (IoT) untuk Penetasan Telur Ayam,” EXPERT: Jurnal Manajemen Sistem Informasi dan Teknologi, vol. 10, no. 2, p. 36, 2020, doi: 10.36448/jmsit.v10i2.1602.

Downloads

Published

2024-05-08