Peningkatan Ketahanan Aus Baja Karbon Rendah Melalui Variasi Suhu Carburizing
DOI:
https://doi.org/10.33474/rm.v4i1.21767Abstract
The automotive industry is one of the industries that is currently developing in Indonesia. Research has been carried out on materials used in the automotive industry, one of which is improving the mechanical properties of low carbon steel which is widely used as sprocket material. Sprockets are parts of a motorbike that require surface hardness and ductility at the core. So carburizing treatment is the right treatment to increase the wear resistance of low carbon steel. The material used in this research is ST 37. This research aims to increase the surface hardness of ST 37 by varying the carburizing temperature, where the temperatures used are 850℃ and 900℃ with a holding time of 3 hours. Wear resistance testing uses the weight loss method by comparing the ST 37 sprocket with sprockets sold on the market. The highest wear resistance was obtained on sprockets with carburizing treatment at a temperature of 900℃ with test results of 1.65 x 10-2 mm3/hour.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Dewi Izzatus Tsamroh, Cepi Yazirin, Agus Dwi Putra
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
The copyright of any articles in RING ME journal, will and should be held by the author only. Our journal only publish, but will never demand the copyrightship from the author.