ANALYSIS OF DIMENSIONAL AND CALCULATIONS STRUCTURE DESIGNED BASED ON SNI 2847-2013
DOI:
https://doi.org/10.33474/jice.v2i1.11272Abstract
Floor slabs are structural components of a building that have certain dimensions to transmit dead and live loads on them to be distributed to their supports. Designing the floor slabs of a building, load data will be borne by the structure, so that the planned structure is able to bear the loads and forces that work. With careful planning, it is expected that the dimensions and reinforcement of the floor slabs are economical and safe which can avoid deflection and cracks. The building being reviewed is hospitals in Surabaya. This building consists of 9 floors with a height of up to 37 m. Planning dimensions and reinforcement in this hospital building includes two-way slabs with different size variations. The analysis was carried out using the 'envelope method' in accordance with SNI 2847: 2013 (Basics of Reinforced Concrete Planning). The results of the analysis of dimensions and reinforcement in this hospital building are: a) the dimensions / thickness of the plate on the roof plate is 125 mm, while b) the reinforcement used on this floor plate is Ø10-125 and the reinforcement for Ø10-200. Each moment analyzed is contained in the analysis results table and floor slab reinforcement drawings.References
Q. Kai, B. Li, Q. He and W. Yi, "Slab effects on response of reinforced concrete substructures after loss of corner column," ACI STRUCTURAL JOURNAL, vol. 109, no. 6, pp. 91-101, 2012.
A. S. Saadoon, A. M. Abbas and H. K. Hussain, "A Review on Flat Slab Punching Shear Reinforcement," Journal of University of Babylon for Engineering Sciences, vol. 27, no. 3, pp. 44-58, 2019.
F. Stochino and F. L. Gayarre, "Reinforced Concrete Slab Optimization with Simulated Annealing," applied sciences, vol. 9, no. 3161, pp. 1-14, 2019.
F. N. Constantine, M. D. J. Sumajouw and R. E. Pandaleke, "STUDI PERBANDINGAN ANALISIS FLAT SLAB DAN FLAT PLATE," JURNAL SIPIL STATIK, vol. 7, no. 11, pp. 1397-1406, 2019.
M. M. SAZZAD, M. S. AZAD, M. T. ISLAM and F. I. RAHMAN, "Effect of Mesh Size of Floor Slab against Lateral Loads while using Etabs Program," International Journal of Advanced Structures and Geotechnical Engineering, vol. 6, no. 1, pp. 40-44, 2017.
A. Asroni, Reinforced Concrete Beams and Plates, Yogyakarta: Graha Ilmu, 2010.
H.-G. Park, H.-J. Hwang, G.-H. Hong, Y.-N. Kim and J.-Y. Kim, "Immediate and Long-Term Deflections of Reinforced Concrete Slabs Affected by Early-Age Loading and Low Temperature," ACI STRUCTURAL JOURNAL, vol. 109, no. 3, pp. 413-422, 2012.
B. Q. Abdulrahman and O. Q. Aziz, "Strengthening RC flat slab-column connections with FRP composites: A review and comparative study," Journal of King Saud University - Engineering Sciences, vol. https://doi.org/10.1016/j.jksues.2020.07.005, 2020.
Anonymous, SNI 2847: 2013, Structurall Concrete Requirements for Buildings, Jakarta: National Standardization Agency, 2013.
Anonymous, SNI 1727: 2013, Minimum Load for Designing Buildings and Other Structures., Jakarta: Nasional Standardization Agency, 2013.