ROAD THICKNESS ANALYSIS USING MDP METHOD 2017 (CASE: PURWODADI – NONGKOJAJAR)

Penulis

  • Ratna Handayani East Java Province Road Agency
  • Ahmad Faathir Wicaksono East Java Province Road Agency

DOI:

https://doi.org/10.33474/jice.v2i2.14692

Kata Kunci:

Road Pavement, Pavement Thickness, Benkelman Beam, MDP.

Abstrak

The Purwodadi - Nongkojajar road section is one of the East Java Province roads in UPT PJJ Probolinggo, which received funding from the Regional Road Grant Program (PHJD). From the results of the road condition survey in 2020, the condition of road damage in the form of holes and hair cracks was obtained. Based on this, it was necessary planning the thickness of the re-pavement or overlay. This program begins with inventory and road condition, topographic and soil investigation surveys. From the results of the topographic survey, we can measure the slope, then we conduct an investigative survey using Benkelman-beam deflection measure tool to determine the back- deflection value. References and secondary data of traffic growth and road class data are collected. The thickness of the pavement was calculated using the MDP 2017 method. This research found that the required layer was AC-WC layer with an expected thickness of 4 cm. Due to the uneven condition of the existing road, an additional leveling layer AC-BC was needed to overcome this condition with a thickness of 3.0 cm.

Biografi Penulis

Ratna Handayani, East Java Province Road Agency

Junior Road and Bridge Engineer

Ahmad Faathir Wicaksono, East Java Province Road Agency

Junior Road and Bridge Engineer

Referensi

Irwan Lie Keng Wong, “Studi Perbandingan Perkerasan Jalan Lentur Metode Bina Marga dan AASHTO dengan Menggunakan Uji Dinamic Cone Penetration (Ruas Jalan Bungku Funuasingko Kabupaten Morowali),†Konf. Nas. Tek. Sipil 7 Univ. Sebel. Maret, 2013.

M. Y. M. Putra, “Evaluasi Kondisi Fungsional dan Struktur Menggunakan Metode Bina Marga dan AASHTO 1993 Sebagai Dasar dalam Penanganan Perkerasan Lentur Studi Kasus: Ruas Medan-Lubuk Pakam,†2013.

Ditjen Bina Marga, “Perencanaan Tebal Lapis Tambah dengan Metode Lendutan.†2005.

NAPA, Hot Mix Asphalt Materials Mixture Design and Construction. 1996.

Badan Standardisasi Nasional, “Cara uji lendutan perkerasan lentur dengan alat,†2011.

Ditjen Bina Marga, Manual Desain Perkerasan Jalan. 2017.

Yang Huang, Pavement Analysis and Design. 2004.

B. M. Jatim, Status dan Fungsi Jalan Provinsi Jawa Timur. 2016.

Dhiratama Cv, “Laporan akhir perencanaan jalan ruas Purwodadi - Nongkojajar,†2020.

B. M. Jatim, “Data LHR,†2020.

Unduhan

Diterbitkan

2022-02-21

Cara Mengutip

Handayani, R., & Wicaksono, A. F. (2022). ROAD THICKNESS ANALYSIS USING MDP METHOD 2017 (CASE: PURWODADI – NONGKOJAJAR). Journal Innovation of Civil Engineering (JICE), 2(2), 96–103. https://doi.org/10.33474/jice.v2i2.14692

Terbitan

Vol 2 No 2 (2021)

Bagian

Articles

Lisensi

Journal Innovation of Civil Engineering (JICE) with registration number ISSN 2775-5592 (online) published by Universitas Islam Malang by applying for copyright and License.


Copyright:

  • Copyright in each text is the property of the author.
  • The author agrees that JICE has the right to the first license issued with a Creative Commons Attributions-ShareAlike 4.0 International License.
  • The author can write the article separately through non-exclusive distribution with other versions related to the first published article in the Journal Innovation of Civil Engineering (JICE).


License:

  • Attribution: You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • ShareAlike: If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions: You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.


You are free to:

  • Share a copy and redistribute this material in any form or format.
  • Change and make derivatives of this material for any purpose, including commercial interests.

The licensor cannot revoke the above conditions as long as the authors comply with the terms of this license.